NACHI-FUJIKOSHI CORP. / Product Info. / Bearings

Skip Navigation

Bearings

Local Navigation

Product Info. Top

Catalog

Main text

Bearings for Specific Application

Self-aligning Clutch-release Bearings
Design for high temperature, and high rotating speed. Design for exclusive use in manual transmission clutch. Designed with aligning function and positioning features . Low-friction factor resin reduces rotation abrasion of the axle.

Wheel Assembly Bearings
To obtain predetermined preload clearance after attachment, initial internal clearance has setup. Preload adjustment during an assembly process is unnecessary. The type with a built-in seal has unnecessary seal fixation during an assembly process. Lightweight, compact and handling is easy.

Double-row Angular contact Ball Bearings for CarAir Conditioning Magnetic Clutch
Design for high temperature, and high rotating speed. High performance seal to prevent the ingress of dust and water. This bearing has longer operating life under engine vibration conditions because of excellent grease for high temperature, high rotating speed and vibration.

High-speed Angular Contact Ball Bearings BNH Series
Low heat generation, high speed performance, high speed rotational accuracy, and rigid bearing specific for machine tool spindle

Combination Angular Contact Ball Bearings TAH,TBH Series
The bearing is designed to rotate at high speed with axial load supported by the machine tool spindle. Single-row universal flush ground ball bearings can be combined to meet load requirement.

Double-direction Thrust Angular Contact Ball Bearings TAD series
Double-direction Thrust Bearing used in machine tool spindle. High contact angles carry high axial loads.

Double - row Cylindrical Roller Bearings
Larger load capacity than single-row cylindrical roller bearings. Used for machine tool spindles etc.

Cross tapered roller bearing
This specially designed single bearing has functions of two tapered roller bearings. Compact design in the axial direction. Can handle radial load, axial load and moment load.

Ball screw support bearings TAB series
High precision and greater axial rigidity specially for precision feed mechanism. Preload adjusted allowing easy installation.

High thrust Ball screw support bearings TAF series
Bearing with greatly enhanced axial load carrying capacity. Bearing that allows to simplfy surrounding components.

TAB series ball screw support bearings with seals
Seal is integrated into a ball screw support bearing with great axial rigidity. Maintenance free because high performance grease is pre-filled (Prevents entry of foreign substance from outside.) Preset preload for easy installation onto the machine.

Bearings for Printing Machines
High precision bearings designed only for printing machines to achieve high printing quality

Sheave Bearings
Full compliment double-row cylindrical roller bearings with ribs on inner and outer rings High dynamic and static radial load capacity Fairly large moment load and some axial load can also be supported.

Bearings for railroad vehicles
Three kinds of bearings Bearings for axles, gear boxes and traction motors Exclusive design for each application. Cylindrical roller bearings are mainly used for axles with heavy radial load (Double-row tapered roller bearings have also used recently). Tapered roller bearings are used for gear boxes where large thrust loads are expected. Deep-groove ball bearings and cylindrical roller bearings are used for traction motors.