Skip Navigation

Machine Tools

Main text

Thread grinding machines “GTE Series”

Specification

●Thread grinding machines “GTE Series”

  GTE-7A GTE-10A GTE-20A
Max. center distance (mm) 800 1,500 2,300
Max. grinding outside diameter (mm) 200 200 200
Grinding lead (mm) 700 1,300 2,100
Grinding wheel size
(OD×W×ID) (mm)		 355×(10to32)×152.4 510×(10to75)×228.6 510×(10to75)×228.6
Wheel spindle swivel angle (°) ±45 ±45 ±45
Max. table stroke (mm) 700 1,400 2,200
Floor space
(Wmm×Dmm)		 3,440×4,200 6,500×4,200 7,110×4,200
Weight (kg) 10,000 12,000 18,000

  GTE-30A GTE-40A GTE-50A
Max. center distance (mm) 3,650 4,500 5,400
Max. grinding outside diameter (mm) 200 200 200
Grinding lead (mm) 3,300 4,000 5,000
Grinding wheel size
(OD×W×ID) (mm)		 510×(10to75)×228.6 510×(10to75)×228.6 510×(10to75)×228.6
Wheel spindle swivel angle (°) ±45 ±45 ±45
Max. table stroke (mm) 3,400 4,100 5,100
Floor space
(Wmm×Dmm)		 10,000×4,200 12,200×4,200 13,900×4,200
Weight (kg) 24,000 25,000 26,000

●Thread grinding machines for mass production “GTE-SA series”

  GTE-5SA2 GTE-5SA4
Max. center distance (mm) 200 400
Max. grinding outside diameter (mm) 250 250
Grinding lead (mm) 150 350
Grinding wheel size
(OD×W×ID) (mm)		 405×(10to32)×152.4 405×(10to32)×152.4
Wheel spindle swivel angle (°) ±30 ±30
Max. table stroke (mm) 200 400
Floor space
(Wmm×Dmm)		 2,000×2,800 2,400×2,800
Weight (kg) 6,500 7,500

Layout diagram

●GTE-7A


●GTE-30A

This machine is considered a strategic resource (or service) according to restrictions in the foreign exchange and trade laws. Based on these laws, export from Japan requires an export permit from the Japanese government.

Page Top