NACHI Power finisher TF-4H
Machine Tools
Main text
Power finisher TF-4H
Machine specification
| Part (Plating shaft) | Outer dia : Ø10 ～ |
|---|---|
| Full length : 150 ～ 550mm | |
| Part loading speed (Outer dia Ø22mm) Cycle time (ref.) |
MAX 121mm sec (Part rpm 5000) About 5sec. (Work length 240mm) |
| No. of heads | 4 sets |
| Coolant | Oil-based |
| Coolant filtration system | 1st : Paper filter |
| 2nd : Bag filter | |
| Floor layout | Width × Depth : 1935 × 1876 mm |
| Height : 2363mm | |
| Treatment of used film | Roll-up above lapping heads |
Machine size (outline)
