NACHI-FUJIKOSHI CORP.
Cutting Tools
Main text
GS MILL Hard
GS Hard Coat
Top layered film consists of newly developed ultra aluminum rich Al-Ti-Cr coating, with 3 times better oxidation resistance at 1,100 deg Centigrade.
 |
 |
 |
Fewer macroparticles on film surface result in improved smoothness
 GS Hard Coating |
 Conventional coating |
New geometry
- Smoothly curved flute geometry improves chip removal
- Wide land improves tool regidity
Ext. Diameter 10 (6 Flutes) : SKD61 (53HRC)
Milling condition
| Tool | : GSH6100SF |
| Speed | : 800m/min (25,000min-1) |
| Feed | : 10,500mm/min (0.07mm/tooth) |
| Material | : SKD61 (53HRC) |
| Coolant | : Air blow |
| Cutting length | : 75m |
Ext. Diameter 10 : SKD11 (60HRC)
Milling condition
| Tool | : GSH6100SF |
| Speed | : 70m/min (2,230min-1) |
| Feed | : 900mm/min (0.067mm/tooth) |
| Material | : SKD11 (60HRC) |
| Coolant | : Air blow |
| Cutting length | : 70m |