NACHI-FUJIKOSHI CORP.
Cutting Tools
Main text
AG Power Drills
AGPLSD AG Power Long Drills
Comparison of cutting force and time
| Cutting conditions | |||||
|---|---|---|---|---|---|
| Tool | : | AGPLSD6.0 | Hole depth | : | 102mm Blind hole |
| Cutting Speed | : | 18m/min | Work Material | : | Carbon Steels (260HB) |
| Rotation | : | 955min-1 | Cutting Fluid | : | Wet |
| Feed Speed | : | 143mm/min | Machine | : | Vertical machining center |
| Feed | : | 0.15mm/rev | |||
Comparison of tool life
| Cutting conditions | |||||
|---|---|---|---|---|---|
| Tool | : | AGPLSD6.0 | Hole depth | : | 102mm Through hole |
| Cutting Speed | : | 30m/min | Work Material | : | S50C (220HB) |
| Rotation | : | 1,590min-1 | Cutting Fluid | : | Wet |
| Feed Speed | : | 160mm/min | Machine | : | Vertical machining center |
| Feed | : | 0.1mm/rev Non-step | |||