NACHI-FUJIKOSHI CORP.

• NACHI Tool Solutions

Achieves wear resistance, toughness, and chipping resistance

AG-mill Roughing

Competitor powder HSS-TiCN

Conditions End mill : 20 mm Speed : 40 m/min  (640 min-1) Feed : 0.1 mm/t (260 mm/min) Material : S50C (180HB) Cutting length : 3.6 m Coolant : Emulsion

No re-coating required after re-grinding

Comparison of initial and re-grinding performance

Conditions End mill : 10 mm Speed : 22 m/min  (710 min-1) Feed : 0.037 mm/t (106 mm/min) Material : SKD11 (210HB) Cutting length : 3 m Coolant : Air blow

Grooving of S50C (180HB)

Comparison of cutting length up to baseline tool life

AG-mill Roughing After cutting 6 m

Competitor powder HSS TiCN coating

Conditions End mill : 20 mm Speed : 40 m/min  (640 min-1) Feed : 0.1 mm/t (260 mm/min) Material : S50C (180HB) Cutting length : 3.6 m Coolant : Emulsion

Side milling of SKD 11 (210HB)

Comparison of wear of cutting edge

AG-mill Roughing

Competitor powder HSS TiCN coating After cutting 5 m

Wear in side milling

Conditions End mill : 20 mm Speed : 22 m/min  (355 min-1) Feed : 0.093 mm/t (132 mm/min) Material : SKD11 (210HB) Cutting length : 5 m Coolant : Air blow