NACHI-FUJIKOSHI CORP. / Product Info. / Hydraulic Equipment

Hydraulic Equipment

Surge-less Circuit (standard equipment)

Electronic box wiring product: auxiliary symbol for relay drive (GR)

Lumped terminal box internal circuit

Advantages of the terminal box wiring product

Due to the built-in varistor the recovery time is short and optimal for circuits for which a high-speed response is necessary. Due to the built-in varistor the recovery time is short and optimal for circuits for which a high-speed response is necessary.
Reduces the occurrence of sparks from the relay contact drive, etc. and lengthens the life of the points of contact

Wiring using the terminal block inside the terminal box

Connector wiring product: auxiliary symbol for the sequencer drive (GRV)

Lumped terminal box internal circuit

Advantages of the connector wiring product

We have built in a diode for preventing reverse voltage so the addition of a sequencer output (transistor) protection elements is not necessary
One-touch wiring is possible
Direct connection to a wire-saving system such as Device Net, etc. is possible

Wiring with an M12-4 pin connector

CE marking

Overseas safety standards

You can use NACHI brand solenoid valves throughout the world with peace of mind.

Specifications

Item	SE/SED-G01-40 Series
Maximum pressure ((P,A,B port)	16MPa
Max.flow ^(note1)	40L/min
Permissible back pressure (T port)	16MPa
Holding power (DC24V)	4.8W
Dust and spray protection type	JIS C 0920 IP64(SE-G01), IP65(SED-G01)
Overseas safety standards	CE marking

(note1) The maximum flow differs depending on the operation symbol, circuit, and working conditions.