NACHI-FUJIKOSHI CORP.

Energy-saving effect

Power Consumption Reduced by Approximately 69%
(as compared to NACHI-Fujikoshi’s standard hydraulic units while dwelling)

The base NSP unit consumes about 40% less energy than NACHI-Fujikoshi’s standard hydraulic units. By adding the inverter drive we increase energy savings to approximately 69% as compared to NACHI-Fujikoshi’s standard hydraulic units.

POWER RATE 40% DOWN

As compared to NACHI-Fujikoshi’s standard hydraulic units, the NSP unit cuts 25% and the inverter drive NSPi unit cuts another approximately 40% from energy bills.

Reduces annual CO2 emissions by approximately two tons

The inverter drive NSPi unit emits about 42% less CO2 than NACHI-Fujikoshi’s standard hydraulic units.

Equivalent to two hectares of forest

 Method for calculating energy costs and CO2 emissions

an annual operation time	8000hour	electric power unit price	15yen/kWh
maintaining pressure	17houur/day	CO2 Emission factors	0.555kgCO2/kWh
Discharge	5hour/day

*CO2 emissions factor: default value set by Ministry of Economy, Trade
and Industry & Ministry of the Environment Ordinance Number 3, 2006.

Reduce increase in hydraulic fluid temperature

1.5°C increase in ambient temperature

The NSPi series benefits your entire system by lowering oil temperature to improve machining accuracy, lengthen the life of seals and hydraulic fluid, and reduce factory air conditioning costs.

Improve machining accuracy

Lengthen life of seals and hydraulic fluid

Reduce maintenance costs

Greatly reduce the volume of hydraulic fluid

Low Nois

53db. of the wonder

The noise when dwelling is as quiet as a relaxing coffee shop.
The inverter drive saves energy and increases comfort at the same time.
(6MPa while maintaining pressure NSP-10E-22V1A4-20)